-40%
2 Front Wheel Hub & Bearing For 2007 2008 2009 2010 2011 2012 Nissan Sentra 2.0L
$ 35.31
- Description
- Size Guide
Description
Product Features:* Fits either LH (Driver Side) or RH (Passenger Side) FRONT * Fits 4 Lugs Wheels * Wheel studs already installed * Includes ABS with Tone Ring Sensor
Item Description:
Brand New Wheel Hub Assembly
Direct replacement
Built to strict quality control standards
Replaces dealer part numbers: 513297,29513297,40202ET010, 40202ET01A
Vehicle Fitment:
Fits Nissan Sentra 2007 - 2012
Package Include:
2 Pcs wheel hub bearing
1 Year Warranty
Front Driver Or passenger Wheel Hub And Bearing Assembly Fits 02-07 Saturn Vue
Product Features:
*
Fits either
LH (Driver Side) or RH (Passenger Side) FRONT
*
Fits 4 Lugs Wheels
*
Wheel studs already installed
* Includes ABS with Tone Ring Sensor
Item Description:
Brand New Wheel Hub Assembly
Direct replacement
Built to strict quality control standards
Replaces dealer part numbers:
513297,29513297,40202ET010, 40202ET01A
Vehicle Fitment:
Fits Nissan Sentra 2007 - 2012
Package Include:
2 Pcs wheel hub bearing
1 Year Warranty
Exploded View:
Wheel hub and bearing
Cotter pin
Nut retainer
Wheel hub lock nut
Hub bolt
Splash guard
Steering knuckle
Removal:
Remove the bolt (1) and separate the front wheel sensor from the steering knuckle.
Remove brake caliper torque member bolts, leaving brake hose attached, reposition the caliper aside with wire.
Put alignment marks (A) on disc brake rotor and wheel hub and bearing. Remove disc brake rotor.
Remove cotter pin and the nut retainer,Loosen the wheel hub lock nut from the drive shaft using power tool.
Using a piece of wood and a suitable tool, tap on the lock nut to disengage the drive shaft from the wheel hub and bearing.
Remove the engine side cover.
Remove the lower nut and bolt from the steering knuckle,Separate transverse link from steering knuckle.
Separate drive shaft from wheel hub and bearing, Reposition the drive shaft aside with wire.
Remove the wheel hub and bearing bolts using power tool.
Remove the splash guard and the wheel hub and bearing from the steering knuckle.
NOTE:
Failure to separate the front wheel sensor from the steering knuckle may result in damage to the front wheel sensor;
Pull out the front wheel sensor, being careful to turn it as little as possible.
Do not pull on wheel sensorharness.
Inspection after removel : Check components for deformation
y,
cracks
y,
and other damage
y,
and boots of transverse link ball joint for cracks
y,
axial end play,and swing torque.
Installation:
Installation is in the reverse order of the removal
Caution:
Do not reuse the wheel stud.
Do not reuse the cotter pin.
Place a washer (A) as shown to install the wheel studs (1) by using the tightening force of the nut (B).
Clean the mating surfaces of the joint sub-assembly and the wheel hub and bearing. Apply lubricant to the surface (A) of the joint sub-assembly.
Hold the wheel hub and bearing using a suitable tool. Tighten the wheel hub lock nut
6. Since the drive shaft is assembled by press-fitting, use a torque wrench to tighten the wheel hub lock nut. Do not use a power tool.
7. Too much torque causes axle noise. Too little torque causes wheel bearing looseness. Tighten the wheel hub lock nut to the specification.
8. When installing a the cotter pin (1) and the nut retainer (2), securely bend the cotter pin to prevent rattles.
9. Align the matching marks (A) on the disc brake rotor and on the wheel hub and bearing.
Item Specifics
Placement on Vehicle
Driver Side or Passenger Side Front
Interchange Part Number
513297 wheel bearings(2Pcs)
Fitment
For Nissan
ABS Sensor
Has ABS with Tone Ring Sensor
Brand
ECCPP
Warranty
1 Year
Surface Finish
Polished, Rust Protected
UPC
Does not apply
Bolt Quantity
4
Flange Bolt Hole qty
4
Manufacturer Part Number
ECCPP802805
Spline Quantity
29
Bolt Circle Diameter
4.46 In
Wheel Pilot Diameter
2.57 In
Brake Pilot Diameter
2.65 In
Flange Diameter
5.31 In
Flange Shape
Modified
Flange Offset
1.59 In
Hub Pilot Diameter
3.12 In
Other Part Number
40202ET010, 40202ET01A
Material
steel
Fitment type
Direct replacement
Weight
12LB
Package include
2 X wheel bearing
Item Specifics
Placement on Vehicle
Driver Side or Passenger Side Front
Interchange Part Number
513297 wheel bearings(2Pcs)
Fitment
For Nissan
ABS Sensor
Has ABS with Tone Ring Sensor
Brand
ECCPP
Warranty
1 Year
Surface Finish
Polished, Rust Protected
UPC
Does not apply
Bolt Quantity
4
Flange Bolt Hole qty
4
Manufacturer Part Number
ECCPP802805
Spline Quantity
29
Bolt Circle Diameter
4.46 In
Wheel Pilot Diameter
2.57 In
Brake Pilot Diameter
2.65 In
Flange Diameter
5.31 In
Flange Shape
Modified
Flange Offset
1.59 In
Hub Pilot Diameter
3.12 In
Other Part Number
40202ET010, 40202ET01A
Material
steel
Fitment type
Direct replacement
Weight
12LB
Package include
2 X wheel bearing
WARNING
:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
We stand behind every product we sell.
All of our brand new items come with a
60-Days
money-back guarantee.
We define the item as defective only if it doesn't function as described.
It is the buyer's responsibility to understand the item description before bidding.
We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.
Shipping & handling cost are not refundable.
Man-made damage by abuse or wrong operation is not covered by this warranty.
No product liability insurance is assumed.
PayPal preferred.
Payments are expected within 7 days after the last winning auction is closed; Otherwise Unpaid Item Dispute will be filed with eBay.
Product will be shipped within 2 business days after full payment is received and verified. Delivery Time is about 3-7 business days to most of countries.
All domestic orders will be shipped via USPS, UPS or FedEx from our US warehouse and usually arrives to your door in about 3-5 business days.
We ship the package to your shipping address in eBay instead of the one in PayPal. Please tell us your shipping address if it is different from the one in eBay.
The tracking number will be given for the customer to check the shipping status online (registered or faster service only).
We are not responsible for any wrong or undeliverable addresses. Please verify and update your shipping address on eBay during checkout.
International Buyers a€“ Please Note:
a) Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
b) Please check with your country's customs office to determine what these additional costs will be prior to bidding.
Serious Buyer Only! Please place bid or "Buy it now" only if you agree the price and terms of the product and no argument after the auction.
We strive to source genuine products from the suppliers. However, if you feel any of our products violate your Trademark, Patent Right or any other Intellectual Property Rights, please contact us. We will remove any offending listing immediately while awaiting further discussion.
Picture
Hot Item
2 Pcs Front Hood Lift Supports Struts Shocks Springs For Dodge Ram 2002-2010
USD 22.68
2x For 1999 2000 2001 2002 2003 2004 2005 2006 2007 Ford F150 Remote Car Key Fob
USD 11.69
For 88-98 Chevy GMC 1500/2500/3500 Towing Mirrors Manual Side Mirrors Truck Pair
USD 85.99
Front Wheel Hub Bearing For Chevy Impala Pontiac Grand Prix Buick 513121 5 Lug
USD 38.33
Wheel Bearings For Chevy Impala Pontiac Grand Prix Buick Regal Bearing 2 Front
USD 59.49
Shop Category
Store Home
Towing mirrors
Sepcial LED Package Kit
Oxygen sensor
Fuel pump assembly
Radiator Support
Key
Ignition coils
Struts
Exterior Lights
complete struts
Interior Lights
Lift Supports
Starter
Coilover
wheel spacers
Ignition Distributor
Exhaust System Parts
CV axle
Cab Marker Roof Running Light
Cylinder Piston Gasket Kit
New List Item
Cree 60W Xenon White 9005 HB3 48 SMD Bulbs Driving Fog Headlight LED Light 2X
USD 18.04
ECCPP Exhaust Manifold Passenger Right For Expedition F150 F250 Pickup Truck 4.6
USD 64.35
Front 4WD Lock Axle Actuator for Ram 1500 2011-2016 3.7L 4.7L 5.7L 600-399
USD 69.99
Front 4WD Differential Vacuum Actuator For Toyota 4runner 4.0L 4.7L 41400-35034
USD 48.99
H11 H8 High Power White LED DRL Darytime Drving Light COB 1200LM Lamp Bulb 2x
USD 12.71
Front Driver Or passenger Wheel Hub And Bearing Assembly Fits 02-07 Saturn Vue
Product Features:
*
Fits either
LH (Driver Side) or RH (Passenger Side) FRONT
*
Fits 4 Lugs Wheels
*
Wheel studs already installed
* Includes ABS with Tone Ring Sensor
Item Description:
Brand New Wheel Hub Assembly
Direct replacement
Built to strict quality control standards
Replaces dealer part numbers:
513297,29513297,40202ET010, 40202ET01A
Vehicle Fitment:
Fits Nissan Sentra 2007 - 2012
Package Include:
2 Pcs wheel hub bearing
1 Year Warranty
Exploded View:
Wheel hub and bearing
Cotter pin
Nut retainer
Wheel hub lock nut
Hub bolt
Splash guard
Steering knuckle
Removal:
Remove the bolt (1) and separate the front wheel sensor from the steering knuckle.
Remove brake caliper torque member bolts, leaving brake hose attached, reposition the caliper aside with wire.
Put alignment marks (A) on disc brake rotor and wheel hub and bearing. Remove disc brake rotor.
Remove cotter pin and the nut retainer,Loosen the wheel hub lock nut from the drive shaft using power tool.
Using a piece of wood and a suitable tool, tap on the lock nut to disengage the drive shaft from the wheel hub and bearing.
Remove the engine side cover.
Remove the lower nut and bolt from the steering knuckle,Separate transverse link from steering knuckle.
Separate drive shaft from wheel hub and bearing, Reposition the drive shaft aside with wire.
Remove the wheel hub and bearing bolts using power tool.
Remove the splash guard and the wheel hub and bearing from the steering knuckle.
NOTE:
Failure to separate the front wheel sensor from the steering knuckle may result in damage to the front wheel sensor;
Pull out the front wheel sensor, being careful to turn it as little as possible.
Do not pull on wheel sensorharness.
Inspection after removel : Check components for deformation
y,
cracks
y,
and other damage
y,
and boots of transverse link ball joint for cracks
y,
axial end play,and swing torque.
Installation:
Installation is in the reverse order of the removal
Caution:
Do not reuse the wheel stud.
Do not reuse the cotter pin.
Place a washer (A) as shown to install the wheel studs (1) by using the tightening force of the nut (B).
Clean the mating surfaces of the joint sub-assembly and the wheel hub and bearing. Apply lubricant to the surface (A) of the joint sub-assembly.
Hold the wheel hub and bearing using a suitable tool. Tighten the wheel hub lock nut
6. Since the drive shaft is assembled by press-fitting, use a torque wrench to tighten the wheel hub lock nut. Do not use a power tool.
7. Too much torque causes axle noise. Too little torque causes wheel bearing looseness. Tighten the wheel hub lock nut to the specification.
8. When installing a the cotter pin (1) and the nut retainer (2), securely bend the cotter pin to prevent rattles.
9. Align the matching marks (A) on the disc brake rotor and on the wheel hub and bearing.
Item Specifics
Placement on Vehicle :
Driver Side or Passenger Side Front
Interchange Part Number :
513297 wheel bearings(2Pcs)
Fitment :
For Nissan
ABS Sensor :
Has ABS with Tone Ring Sensor
Brand :
ECCPP
Warranty :
1 Year
Surface Finish :
Polished, Rust Protected
Bolt Quantity :
4
Flange Bolt Hole qty :
4
Manufacturer Part Number :
ECCPP802805
Spline Quantity :
29
Bolt Circle Diameter :
4.46 In
Wheel Pilot Diameter :
2.57 In
Brake Pilot Diameter :
2.65 In
Flange Diameter :
5.31 In
Flange Shape :
Modified
Flange Offset :
1.59 In
Hub Pilot Diameter :
3.12 In
Other Part Number :
40202ET010, 40202ET01A
Material :
steel
Fitment type :
Direct replacement
Weight :
12LB
Package include :
2 X wheel bearing
Item Specifics
Placement on Vehicle
Driver Side or Passenger Side Front
Interchange Part Number
513297 wheel bearings(2Pcs)
Fitment
For Nissan
ABS Sensor
Has ABS with Tone Ring Sensor
Brand
ECCPP
Warranty
1 Year
Surface Finish
Polished, Rust Protected
Bolt Quantity
4
Flange Bolt Hole qty
4
Manufacturer Part Number
ECCPP802805
Spline Quantity
29
Bolt Circle Diameter
4.46 In
Wheel Pilot Diameter
2.57 In
Brake Pilot Diameter
2.65 In
Flange Diameter
5.31 In
Flange Shape
Modified
Flange Offset
1.59 In
Hub Pilot Diameter
3.12 In
Other Part Number
40202ET010, 40202ET01A
Material
steel
Fitment type
Direct replacement
Weight
12LB
Package include
2 X wheel bearing
WARNING
:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
We stand behind every product we sell.
All of our brand new items come with a
60-Days
money-back guarantee.
We define the item as defective only if it doesn't function as described.
It is the buyer's responsibility to understand the item description before bidding.
We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.
Shipping & handling cost are not refundable.
Man-made damage by abuse or wrong operation is not covered by this warranty.
No product liability insurance is assumed.
PayPal preferred.
Payments are expected within 7 days after the last winning auction is closed; Otherwise Unpaid Item Dispute will be filed with eBay.
Product will be shipped within 2 business days after full payment is received and verified. Delivery Time is about 3-7 business days to most of countries.
All domestic orders will be shipped via USPS, UPS or FedEx from our US warehouse and usually arrives to your door in about 3-5 business days.
We ship the package to your shipping address in eBay instead of the one in PayPal. Please tell us your shipping address if it is different from the one in eBay.
The tracking number will be given for the customer to check the shipping status online (registered or faster service only).
We are not responsible for any wrong or undeliverable addresses. Please verify and update your shipping address on eBay during checkout.
International Buyers a€“ Please Note:
a) Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
b) Please check with your country's customs office to determine what these additional costs will be prior to bidding.
Serious Buyer Only! Please place bid or "Buy it now" only if you agree the price and terms of the product and no argument after the auction.
We strive to source genuine products from the suppliers. However, if you feel any of our products violate your Trademark, Patent Right or any other Intellectual Property Rights, please contact us. We will remove any offending listing immediately while awaiting further discussion.
Copyright of eccppautoparts. All rights reserved.